"

快三平台官网✳️【bb01.cn】是亚洲最大自主品牌游戏平台,快三平台官网,百万大奖等您来拿,注册就可以领取各种活动优惠,快三平台官网,无需申请自动到账!

  • <rp id="ugrda"></rp>
  • <progress id="ugrda"><track id="ugrda"></track></progress>
  • <button id="ugrda"></button><dd id="ugrda"><noscript id="ugrda"></noscript></dd>

    <dd id="ugrda"></dd>
        <em id="ugrda"><acronym id="ugrda"><u id="ugrda"></u></acronym></em>
        <li id="ugrda"><acronym id="ugrda"></acronym></li>

        1. <dd id="ugrda"></dd>

          "
          返回首页加入收藏设为首页
          产品搜索:
          首  页 | 公司简介 | 新闻中心 | 产品展示 | 资料下载 | 技术文章 | 在线留言 | 联系我们
           
           


          EPA1664—己烷提取物的检测

          点击次数:4537 发布时间:2013/6/23
          提 供 商: 广州艾欣科学仪器有限公司 资料大锌烊教ü偻?。?/td>
          图片类型: 下载次数: 504
          资料类型: JPG 浏览次数: 4537
          相关产品:
          详细介绍: 文件下载    

           1) Assemble

          a) Assemble cartridge adapters on the vacuum manifold

          b) Place ECUNIOGXF cartridge(s) on each vacuum station needed

          c) Connect the manifold to a suitable trap and attach the trap to a vacuum system capable of

          attaining a minimum of 25” Hg (635 mm) of vacuum

          d) Insert waste collection vial in manifold (optional)

          2) Prepare Water Sample

          a) Adjust the pH of the sample to less than 2 by adding 5 mL of 6N HCl or 2.5 mL of concentrated

          H2SO4

          b) If acid was added to the sample in the field do not add more unless the pH is greater than 2

          Gloves are recommended as skin oils may affect final sample weight

          3) Condition the Cartridge

          a) Rinse sides of cartridge and bottle holder with 10 mL of hexane

          b) Allow cartridge to soak for 1 minute

          c) Draw the hexane through the cartridge using vacuum

          d) Discard the hexane from waste vial

          e) Draw full vacuum through the cartridge for 2 minutes to dry

          f) Add 10 mL of methanol to the cartridge

          g) Slowly draw the methanol through leaving a layer on the cartridge frit

          h) Soak for one minute

          i) Remove waste vial and discard methanol

          From this point on do not let the cartridge dry out otherwise repeat at step f)

          j) Add 30 mL of DI water to the cartridge

          k) Draw the water through the cartridge to waste

          4) Sample Addition

          a) Add the 1 liter water sample directly to the cartridge

          b) Draw the sample through the cartridge under low vacuum. This may take several minutes

          depending on the solids in the sample. (Note 1) Increase vacuum pressure if necessary. Do

          not exceed 500 mL/minute

          c) Remove the cartridge and tap any excess water from the bottom of the cartridge

          d) Replace cartridge and allow to dry under full vacuum for 10 minutes

          e) Remove any water remaining in the bottom support of the cartridge with a paper towel if

          necessary

          5) Elution

          a) Prepare an extract collection vial containing about 8 mm (0.3 inch) of anhydrous sodium

          sulfate

          b) Place the vial in the manifold station under the cartridge

          c) Rinse the water sample bottle with 10 mL of hexane

          d) Add the hexane to the cartridge

          e) Soak cartridge for 2 minutes

          f) Turn on vacuum and slowly draw the hexane through the cartridge and into the collection vial

          g) Turn off vacuum then repeat steps 5 c) – f) 2 additional times but use 10 mL of hexane

          h) Do not allow the solvent to splash into the collection vial

          i) Add another 10 mL of hexane to the cartridge, rinsing the bottle holder

          j) Soak cartridge for 2 minutes

          k) Draw the hexane through the cartridge

          6) Dry the Extract

          a) Remove the collection vial from the manifold and cover with a screw cap

          b) Shake the extract to form a water/hexane emulsion and immediay pour the extract through a

          sodium sulfate funnel or column containing approximay 40 g of anhydrous sodium sulfate

          held in place with a glass wool plug or frit. Do not use filter paper

          c) Collect the extract in a clean, pre-weighed vessel

          d) Rinse the collection vial with hexane and add it to the sodium sulfate. This will rinse the vial

          and the sodium sulfatez

          7) Gravimetric analysis

          a) Carefully evaporate the hexane using a TurboVap® or similar evaporator at 40° C until the

          extract just reaches dryness.

          Note: Do not over dry or low recoveries will result

          Do not dry on a hot plate or in an oven or over dry as low recoveries may result

          b) Allow to cool to room temperature in a desiccator before weighing

          c) Record this weight as the mass per unit volume of oil and grease and report as HEM as mg/L

          Notes

          1) If very high solids are present, add glass wool to the cartridge prior to extraction to prevent clogging and improve

          flow. The glass wool must be thoroughly rinsed as part of the cartridge during the elution step.

          2) Stearic acid must be in solution in the spiking solution or low recoveries will result. If small crystals are present in

          the spiking solution, sonicate or shake until dissolved.

          DCN-118170-

          [ 打印 ] [ 返回顶部 ] [ 关闭
           
          销 售:86-020-36536172,36536170,36536193
          传 真:86-020-36536169
          手 机:13724099587
          技术服务:020—36536172
          在线QQ:
           
          GB/T28112-2001硅橡胶中挥发性甲基硅氧烷含量测定
          GBT-18614-2012 七氟丙烷气相法测定
          盐酸头孢替安有关物质分析谱图
          EPA1664—己烷提取物的检测
          HPLC法测定谷物中黄曲霉毒素B1、G1、B2快三平台官网、G2含量
          液相色谱法分析多环芳烃
          HP-SCX强阳离子交换色谱柱使用手册
          气相色谱分析概述
          气相色谱分析的特点及其应用

          广州艾欣科学仪器有限公司 版权所有 总访问量:887695 地址:广州市白云区京溪路201号云景商务大厦513(总部) 邮编:510515
          联系人:钟生 邮箱:fighter31668@163.com
          GoogleSitemap 网址:www.ballnavgroup.com 技术支持:化工仪器网 管理登陆 ICP备案号:粤ICP备10066876号
          网站关键词:inertsil 色谱柱,inertsustain 色谱柱,依利特液相色谱仪,kromasil,hypersil ,气相色谱仪

          化工仪器网

          推荐收藏该企业网站
          快三平台官网
        2. <rp id="ugrda"></rp>
        3. <progress id="ugrda"><track id="ugrda"></track></progress>
        4. <button id="ugrda"></button><dd id="ugrda"><noscript id="ugrda"></noscript></dd>

          <dd id="ugrda"></dd>
              <em id="ugrda"><acronym id="ugrda"><u id="ugrda"></u></acronym></em>
              <li id="ugrda"><acronym id="ugrda"></acronym></li>

              1. <dd id="ugrda"></dd>